DescriptionThis intermediate-drawing tandem machine is suitable for copper rod with a diameter of 2-2.6 mm. It consists of a wire feed unit, a drawing unit, an electrical control system.
Features1. The new design of drawing drums provides excellent cooling and lubrication of the wire.
2. Highly efficient and economical design ensures low energy consumption.
3. The smooth operation is ensured by a high-precision gear shift system.
4. Long service life due to welded steel case.
5. Stable operation, low noise level, simplified maintenance.
6. Fast form replacement system.
6. Compact structure and new design on the basis of already created equipment.
7. The maximum drawing speed is 1800 m / min.
8. Availability of spare parts for maintenance.
9. The machine is suitable for intermediate drawing of copper wire rod 0.1-0.4 mm, for the production of telephone cables.
Specifications| Name | Specifications |
| Number of wires | 1 |
| Model | ZL250-17 |
| Material | Copper |
| Max inlet diameter (mm) | 2.0-2.6 |
| Max number of forms per katanku | 17th |
| Output (mm) | 0.3-0.7 |
| Max mechanical speed (m / min) | Max. 1800 |
| Outside diameter of the mold (mm) | Φ25 |
| Mechanical exhaust (%) | 25 / 18.6 |
| Diameter of the drawing drum (mm) | Max. 250 |
| Tractor diameter (mm) | Φ250 |
| Drawing motor power (kW) | AC 55 |
| Dimensions (mm) | 2400 × 1070 × 1400 |
| Weight, kg) | 3260 |
Production speed (m / min)Wire without hardening
| Speed (m / min)
|
0.3mm
| 1300
|
0.4mm
| 1400
|
0.7mm
| 1300
|
1.0mm
| 1200
|
Working Requirements1. provide the necessary space in the workshop, min height of 4-5 meters.
2. It is better to have a place of storage of raw material near the machine itself.
3. Qualification workers must carry out the installation and test run of the machine, as well as conduct its operation.
4. Reliable well-sealed tank for circulating liquid and reliable pipe system.
5. This drawing machine with the anti-slip mechanism must have a constant source of water, power and compressed air.
6. Our drawing machines can work together with a crane of 25 tons, a steam generator, an air compressor, forms for drawing, grease for wire rod, oil, heat exchanger.
Note1. for the choice of equipment should be guided by the requirements of their personal production.
2. This machine is not suitable for drawing wire rods made of carbon steel or stainless steel bars.
3. All daily care activities should be carried out.
Implemented projectIn August 2014, our tandem wire drawing machine for copper wire rod was installed in the production of Tatung Cable, Thailand.
