DescriptionThis intermediate wire drawing mill is suitable for drawing copper wire rod and wire rod from copper alloy 3.5 mm in diameter, aluminum rod and aluminum alloy wire rod 4.5 mm in diameter to wire. Our wire drawing machines consist of a wire feed unit, a drawing block, an electrical control system.
Features1. New design of the drawing scheme and an optimized system for supplying cooling liquid.
2. Reduced energy consumption, grease for the engine and wire.
3. This intermediate drawing machine is equipped with a drawing system, which is distinguished by an affordable price and high efficiency.
4. Welded steel housing for long service life.
5 accurate transmission ensures stable operation and low noise level.
6. Compact design and new design based on existing equipment.
7. Max drawing speed of 2000 m / min.
8. Models for Φ250 mm 17 shapes and Φ280mm 9 shapes.
Specifications| Name | Specifications |
| Number of wires | 1 | |
| Model | ZL250-17 | ZL280-9 | ZL250B-17 |
| Material | Copper | Copper | Copper and Aluminum Alloy |
| Max input diameter. (mm) | Max. 3.5 | Max. 3.5 | Max. 4.2 |
| Max number of forms per wire | 17th | 9 | 17th |
| output (mm) | 0.32 ~ 2.0 | 0.4 ~ 2.0 | 0.4 ~ 2.0 |
| Outside diameter of the mold (mm) | 2000 | 2000 | 2000 |
| Outside diameter of die (mm) | Φ25 / 32 | Φ25 / 32 | Φ25 / 32 |
| Mechanical exhaust (%) | 25 / 18.6 | 18.18 / 13.2 | 18.18 / 13.2 |
| Max diameter of the drawing drum (mm) | 250 | 280 | 250 |
| Tractor block diameter (mm) | Φ250 | Φ280 | Φ250 |
| Drum motor power (kW) | AC55 | AC55 | Alum Lowthrow: AC45 Copper: AC55 |
| size (millimeter) | 2400 × 1070 × 1400 | 1800 × 1300 × 1400 | 2400 × 1070 × 1400 |
| Weight, kg) | 3260 | 2000 | 3260 |
Production speed (m / min)Wire size without hardening
| Speed (m / min)
|
0.4mm
| 1800
| 1800
|
0.6mm
| 1600
| 1600
|
0.8mm
| 1300
| 1300
|
1.0mm
| 1200
| 1200
|
2.0mm
| 600
| 600
|
2.6mm
| 450
| 450
|
Working Requirements1. Provide the necessary space in the workshop, min height 4-5 meters.
2. It is better to have a place of storage of raw material near the machine itself.
3. Qualification workers must carry out the installation and test run of the machine, as well as conduct its operation.
4. Reliable well-sealed tank for circulating liquid and reliable pipe system.
5. This drawing machine with the anti-slip mechanism must have a constant source of water, power and compressed air.
6. Our drawing machines can work together with a crane of 25 tons, a steam generator, an air compressor, forms for drawing, grease for wire rod, oil, heat exchanger.
Note1. for the choice of equipment should be guided by the requirements of their personal production.
2. This machine is not suitable for drawing wire rods made of carbon steel or stainless steel bars.
3. All daily care activities should be carried out.
Implemented projectIn August 2013, our intermediate wire drawing machine of copper wire rod was installed in the Kazakh production of Kaz Cable.
