DescriptionThis drawer with anti-slip mechanism is equipped with an independent servo motor, the machine is suitable for drawing copper and alloyed copper wire rod with a diameter of 8 mm, aluminum rod and alloyed aluminum rod of diameters of 9.5 mm. This machine consists of a feed unit, a drawing unit and an electrical control system.
Features1. This drawing machine has a system of protection against slippage of wire rod during drawing, it does not allow damage to the surface of the finished wire.
2. Wire drawing machine is the ideal equipment for working with various metals, without the need to replace the drawing block when working with different materials.
3. Each drawing cone has an individual drive in the form of a servo motor, which ensures uniform operation.
4. The power consumption was significantly reduced, and the output power of the engine can be adjusted depending on the specifications.
5. Quick and easy replacement of forms.
6. Compact structure and new design based on existing equipment.
7. The maximum drawing speed is 1800 m / min.
8. Availability of all spare parts and maintenance.
| Model | FDL450 |
| Material | Copper, copper alloy, aluminum, aluminum alloy, brass, etc. |
| Configurations | Horizontal type, complete lubrication system, each traction washer is equipped with its own motor |
| Traction device diameter | φ450mm |
| Thrust washer diameter | φ500mm |
| Diameter of the inlet | Max.KKKKKKKφ8mm |
| Diameter of outlet | φ1.2KKKKKKK- 3.5mm |
| Drawing speed | Max.KKKKKKK1800 m / min |
| Thrust washer motor power | Max.KKKKKKK52kW |
| Power of traction device | Max.KKKKKKK70kW |
| Diameter of the finished copper wire (mm) | Speed (m / min) |
| 1.20 | 1800 |
| 1.6 | 1600 - 1700 |
| 2.0 | 1500 |
| 2.6. | 1200 |
| 3.0 | 1000 |
| 3.5 | 700 |
Working Requirements1. provide the necessary space in the workshop, min height of 4-5 meters.
2. It is better to have a place of storage of raw material near the machine itself.
3. Qualification workers must carry out the installation and test run of the machine, as well as conduct its operation.
4. Reliable well-sealed tank for circulating liquid and reliable pipe system.
5. This drawing machine with the anti-slip mechanism must have a constant source of water, power and compressed air.
6. Our drawing machines can work together with a crane of 25 tons, a steam generator, an air compressor, forms for drawing, grease for wire rod, oil, heat exchanger.
Note1. for the choice of equipment should be guided by the requirements of their personal production.
2. This machine is not suitable for drawing wire rods made of carbon steel or stainless steel bars.
3. All KKKKKKK daily care measures should be carried out.
Implemented projectFebruary 2015, our drawing machine was installed at the production of BOWAY GROUP city of Ningbo, China.
